|
|
| Step 42: |
- Continue to:
Add two gold beads on the left (blue) string, crisscross the right (red) string through the last bead added. Continue to pass the blue string (the one you used to add new beads on) through one old bead from step 36 (marked A).
|
|
 |
| Step 43: |
- Continue to:
Add one gold bead on the bottom (red) line, crisscross the top (blue) line through the last bead added. Continue to pass the red string (the one you used to add new beads on) through two old beads from step 37 and 39 (marked A and B).
|
|
|
|
|
| Step 44: |
- Continue to:
Add one gold bead and crisscross the other string through this new bead. Continue to pass the blue string through three old beads from step 39, 40 and 42 (marked A, B and
C).
Continue to pass the red string through one old bead marked C.
Both string should be crisscrossed at the bead Marked C.
|
| Step 45: |
The tail:
The two old beads marked in pink is where the tail will be added on. |
|
|
- Cut a new piece of string around 5 inch long.
Pass each end of the string up through the two pink beads marked on the above diagram.
Continue to Add one black bead on each end of the string, then combine the string and add one black bead.
Continue on the left (red) string, add two black beads, pass this same string back through the second last bead, both your string should meet head to head now.
Tie off and loop the excess back through the piece.
|
|
 |
| Step 46: |
- The legs:
Cut a piece of string around 10 inches long.
|
|
 |
| Step 47: |
- Continue to:
Add three gold beads on the bottom (red) string, crisscross the top (blue) string through the last added bead. Continue to pass the red string (the one you used to add new beads on) through one old bead from step 46 (marked A).
|
|
 |
| Step 48: |
- Continue to:
Add two gold beads on the right (blue) string and crisscross the other end of the string through the last added bead. Continue to pass the blue string, the one you used to add new beads on, through two old beads from step 46 and 47 (marked A and B).
|
|
 |
| Step 49: |
- Continue to:
Add one gold bead and crisscross the other line through this same bead.
Do not tie or cut off.
Leave this aside and make three more by repeating step 46 to 49.
|
|
 |
| Step 50: |
Where to add the four legs:
The diagram shows the belly of the pony.
The four darker beads is where you will be adding the four legs you made on the above tutorial. |
|
|
- Take once piece of beaded leg you finished in step 49, continue from the string that is left as it is represented by the red dot.
Add one new gold bead (represented by the purple bead) on each side of the string, crisscross both string through one of the bead that was marked on the belly of the pony to add the legs on the above diagram.
Continue to pass the red (string pointing up) string up back one bead from the leg marked A.
|
|
 |
|
- Continue to:
Add one last gold bead on the top (red) string, tie both string together, loop the excess back through the piece.
- Repeat the above of attaching the leg with the rest of the legs the exact same way.
|
|
 |
|
|
|
|
|
|
| Check out our Bead Project page or
Photo Gallery for more Ideas |
Disclaimer: The information in each project is submitted by our users and presented in good faith, but no warranty is given, nor results guaranteed, nor is freedom from any patent to be inferred. Since we have no control over physical conditions surrounding the application of information herein contained,
BeadJewelryMaking.com disclaims any liability for untoward results or content.
Important: Please be sure to thoroughly read the instructions for all products, paying particular attention to all cautions and warnings shown to ensure the proper and safe use of the product for child safety in accordance to age safety standards.
Copyright: Users voluntarily submits their own content and the copyright belongs to the user themselves, but by submitting any and all information to BeadJewelryMaking.com users agrees that these information can be evaluated, use or not to use and amended by BeadJewelryMaking.com.
All Rights Reserved. No part of this Project may be reproduced in any form without permission in writing, except for your personal use, except by reviewer, who may in reviewing this project, quote brief passages in a magazine or newspaper. The viewer is granted a limited, non-transferable one-time license to print one copy of each printable page for personal use without specific permission. Further copying, distribution or use of any of the material herein, including without limitation printable pages, is prohibited.
|
