Beaded Crystal Ring

	July 2006 Beaded Crystal Ring
	You can find a variety of Free Arts and Craft Project here, including beaded project and other project. This month, I would like to feature the instruction on a beaded crystal ring.

The pictorials are illustrated with spaces between beads for a clearer direction, in the actual beading, there should be no spaces.

Beaded Crystal Ring

What you need:

1)    Crystal Bicones (20pcs 4mm crystal)
2)    Silver white glass seed beads.
2)    Beading wire (25 gauge) 0.25mm

Step 1:

Before you start, always remember to pull tight on every step.
Cut a piece of wire around half a meter long.

Add 3 seed beads at the center of the wire, cross the other end of the wire through the last two beads added. Make sure you even out both side of the wire so that they are of the same length on both side.

Step 2:

Take the left (red) wire, add on one bead, one crystal and one last bead, cross the other wire (black) through all three that you just added and pull tight.

Step 3:

Now that you have got the idea, I will go faster.

Continue to add beads and crystal and crisscross it the way you did on step 2.
Add one bead, two crystals, one bead and crisscross;
Add one bead, three crystals, one bead and crisscross;
Add one bead, four crystals, one bead and crisscross;
Add one bead, four crystals, one bead and crisscross;
Add one bead, three crystals, one bead and crisscross;
Add one bead, two crystals, one bead and crisscross;
Add one bead, one crystal, one bead and crisscross;
Add two beads and crisscross;
Add one bead and crisscross;

Next continue the very last step by keep adding one bead and crisscrossing until you reached the ring size you need (measure around your finger as you go along) when you reached the length that wraps around your finger, goes to the next step.

Step 4:

The Green bead is indicating the very first bead you added from step 1 (which is where you will join)

After reaching the length you need, just crisscross both wires through the very first bead added from step 1 (green bead), tie off, but do not cut off straight away, try looping them back through the ring as far as possible, no fixed sequence - this is to strengthen the ring and knot you tied.

More projects to be found in the below categories:

Other Project	Adult Project	Flower Project	Jewelry Project
Kid Art Project	Bead Project	Ring and Bracelet Project

Check out our Bead Project page or Photo Gallery for more Ideas
Disclaimer: The information in each project is submitted by our users and presented in good faith, but no warranty is given, nor results guaranteed, nor is freedom from any patent to be inferred. Since we have no control over physical conditions surrounding the application of information herein contained, BeadJewelryMaking.com disclaims any liability for untoward results or content. Important: Please be sure to thoroughly read the instructions for all products, paying particular attention to all cautions and warnings shown to ensure the proper and safe use of the product for child safety in accordance to age safety standards. Copyright: Users voluntarily submits their own content and the copyright belongs to the user themselves, but by submitting any and all information to BeadJewelryMaking.com users agrees that these information can be evaluated, use or not to use and amended by BeadJewelryMaking.com. All Rights Reserved. No part of this Project may be reproduced in any form without permission in writing, except for your personal use, except by reviewer, who may in reviewing this project, quote brief passages in a magazine or newspaper. The viewer is granted a limited, non-transferable one-time license to print one copy of each printable page for personal use without specific permission. Further copying, distribution or use of any of the material herein, including without limitation printable pages, is prohibited.

July 2006 Beaded Crystal Ring

Beaded Crystal Ring

Beaded Crystal Ring